Temperature, thermal efficiency, and gradient performance from two seawater-SZ solar ponds

This paper presents 10 months of experience with two seawater-SZ (Storage Zone) solar ponds operated as a source of warm seawater which could have been used in an adjacent mariculture facility. Observations and extensive temperature, gradient and efficiency data are presented. This work demonstrated operation of and heat extraction from seawater-SZ solar ponds over a much longer interval than in previous work. It confirmed that seawater-SZ solar ponds can consistently give useful temperature elevations. A few phenomena not characteristic of conventional solar ponds were identified and are discussed.     

Transient dynamics of cylinders under wave slamming

Large diameter slender cylindrical shells used as buoyancy chambers and support legs for compliant marine structures experience a variety of impact loadings which could induce significant levels of dynamic response. By examining the response of a typical range of cylindrical shell geometries to a simulation of the impact loading typical of wave slamming, the paper examines the likely levels and practical significance of the transient dynamic response. It shows that the levels of dynamic response are sufficiently severe to have important implications for the triggering of buckling and fatigue collapse characteristics. It is suggested that this phenomenon requires additional more-detailed consideration, including the provision of reliable predictions of transient slam pressure distributions and the levels and forms of hydrodynamic damping, as well as the effects of more practical shell and stiffening geometries, and ambient stress levels.     

Epoxide polymerization

Summary Poly(propylene oxide), PPO, obtained using diphenylzinc, Ph₂Zn, and using the diphenylzinc-water system at various molar ratios H₂O/Ph₂Zn, were studied through ¹H NMR and IR spectroscopy establishing that the polymerization initiates by coordition of propylene oxide (PO) to a terminal zinc atom of the active species followed by consecutive insertions of PO units at this zinc atom. The PPO obtained showed Ph-and HO-, HO-and HO-end-groups depending on the molar ratio H₂O/Ph²Zn used, and also HO-and PhO-end-groups when oxygen was present in the polymerization system.     

Ionomer composites based on sepiolite/hydrogenated poly(styrene butadiene) block copolymer systems

Ionomeric composites based on sepiolite and hydrogenated poly(styrene butadiene) block copolymer were obtained and characterized from a microstructural and electrical point of view. Before blending, because of the high silanol group concentration in the sepiolite, the latter could be organophilized with suitable coupling agents. The resulting materials were easily processed into thin films or membranes 0.2–0.4 mm thick, their conductivity in some cases approaching 10^?1 S/cm. Their suitability for film formation and good electrical properties indicate potential applications as electrolytes in polymer fuel cells. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3512–3519, 2002     

Spreading Codes Generator for Wireless CDMA Networks

The prime characteristic of spread spectrum modulated signals is that their bandwidth is greater than the information rate. In this way a redundancy is introduced that allows the severe levels of inteference inherent in the transmission of digital information over radio and satellite links to be overcome. Current spread spectrum applications are primarily in military communications; nevertheless, there is growing interest in this technique for third generation mobile radio networks (UMTS, FPLTS, etc.) with open discussion regarding the practicality of using a multiple access system based on spread spectrum techniques (CDMA). However, in order to support as many users in the same bandwidth as other multiple access techniques such as TDMA or FDMA, it is important how to generate large families of sequences that present low cross-correlation. The aim of this paper is to describe a spreading codes generator that can produce a large number of PN sequences with good properties of auto- and cross-correlation. Moreover, the codes generated shows high unpredictability and good statistical behaviour. This also allows the implementation of some features that are common on military networks such as message privacy (increasingly important in commercial networks) without additional cost. The structure presented shows itself to be advantageous for high speed generation of codes at a low cost, low power consumption (allowing longer life for batteries), small size and simplicity of implementation, essential ingredients for commercial equipment. Another attractive feature is its structural parallelism, useful in VLSI implementations. All of these features render it potentially suitable for the implementation of channel bandwidth sharing systems in future wireless personal communications networks.     

Integrating scheduling and control functions in computer integrated manufacturing using artificial intelligence

Proper integration of scheduling and control in Flexible Manufacturing Systems will make available the required level of decision-making capacity to provide a flexibly-automated, efficient, and quality manufacturing process. To achieve this level of integration, the developments in computer technology and sophisticated techniques of artificial intelligence (AI) should be applied to such FMS functions as scheduling. In this paper, we present an Intelligent Scheduling System for FMS under development that makes use of the integration of two AI technologies. These two AI technologies — Neural Networks and Expert Systems — provide the intelligence that the scheduling function requires in order to generate goodschedules within the restrictions imposed by real-time problems. Because the system has the ability to plan ahead and learn, it has a higher probability of success than conventional approaches. The adaptive behavior that will be achieved contribute to the integration of scheduling and control in FMS.     

Urban growth and manufacturing change in the United States-Mexico borderlands: A conceptual framework and an empirical analysis

This article is a contribution to the study of urban and manufacturing evolution that develops and applies the author's concept of the urban-manufacturing life cycle. This concept relates internal characteristics and external impacts of the urban manufacturing base to the process of urban growth by considering the most significant variables and their changes over time. Emphasis is also placed on process-oriented evolution and general relevance rather than outcomes. An application to the general study of border cities with distinct levels of development follows a review of the urban and regional growth literature, as an initial contribution to the development of an evolutionary theory of borders. Empirical analyses with longitudinal data for five major United States and Mexican border urban clusters then evaluate the general assumptions of the concept. Growth trends in urban population, sectoral employment shares, urban industrial structure, employment, and number of manufacturing plants are examined in each of the cities and urban clusters considered. The study concludes that the empirical analyses generally verify the assumptions of the urban-manufacturing life cycle.     

Paste Residence Time in a Spouted Bed Dryer. III: Effect of Paste Properties and Quality Interactions

The aim of this study was to evaluate the effects of paste properties on residence time during drying in a spouted bed dryer with inert bodies. The effect of paste solids content, surface tension, and viscosity on the residence time distribution and the mean residence times were studied using factorial experimental designs. The inert bodies used were glass and polyethylene beads. The mean residence times varied from 13.6 to 16.3 and 12.2 to 17.7 min for drying on glass and polyethylene beads, respectively. The analysis of variance showed that mean residence times significantly depended on solids content and surface tension for glass beads and also on viscosity for polyethylene beads. The residence time distributions for all conditions studied fitted well to the perfect mixing cell when applying the continuous stirred vessels in series model analysis. The powder density, flowability, and particle size depended on paste properties and inert type.     

Variation in Malting Quality and Heat Resistance in the Malting Barley Variety “Alexis”

In earlier studies concerning vigour, where subsamples are heat‐treated before germination there was found heat‐sensitive as well as heat‐resistant barley samples. The vigour model developed by Ellis and Roberts and further developed at Carlsberg, could only describe the heat‐sensitive barleys. Seventeen samples of the “Alexis” variety grown widely in Europe were collected from the EBC trials in 1994 in order to see if heat resistance in barley was influenced by different growing conditions. We found both heat‐sensitive samples following the vigour model as well as pronounced heat‐resistant samples, but these were not divided according to growing conditions. The germination curves dependent on heat treatment and germination time were evaluated by Principal Component Analysis (PCA). Heat‐resistant barley samples could be differentiated from heat‐sensitive samples already after ½ h of heat treatment at 68°C (12% moisture) and after 3 days of germination. The barley samples were analysed with regard to malting quality. The PCA evaluation of the data divided the samples according to growing location, mainly due to differences in protein and β‐glucan. However, the malting analyses could not describe the differences in heat resistance and sensitivity of the barleys. The biochemical background of the heat resistance found is discussed on the basis of literature. Our findings should give an experimental basis for exploiting a biochemical principle for heat resistance, which is formed during grain filling and consumed during storage and germination.